How Do You Clean & Wash Vinyl Wraps?

Your car can become unique and eye-catching with Vinyl wrap. How to wash it would be different from how you would clean a standard car because it isn't like the regular paintwork, do it very carefully to avoid scratches, marks, etc.

Products that you need to use to wash cars with Vinyl wraps are:

1. A gentle Car wash soap.

2. Soft or Non-abrasive cloth or sponge.

3. Two buckets with a dust filter or pressure washer.

4. A wiper.

5. Microfiber Towel.

6. Low-pressure water pipe.

If you carefully follow the instructions on how to wash a car with the vinyl wrap, you won't have any issues, and your wrapped car will be clean and damage-free.

Step 1: Park your car in a shaded area.

The heat can damage your vinyl wrap. In actuality, vehicle graphics are removed using the heat. The wrap, when introduced to heat, can make it soft. A wrapped car should be kept out of the sun's heat, especially while cleaning it. Please do not wash your vehicle when the surface is hot because it might result in stains, indents, and scratches.

Step 2: Check for any permanent contaminants, then soak and scrub them.

Check the wrapped vehicle carefully for leftover contaminants such as tree sap, bird droppings, or other specks of dirt. If you discover any, soften the impurities by soaking them in hot, soapy water for a few minutes, then wipe off the toxins with a washcloth. If necessary, keep soaking and scrubbing.

Step 3: Use only low pressure to pre-rinse the wrapped car.

When washing a wrapped car, it is preferred to use a low-pressure hose nozzle and ensure the water is not too hot (below 140 degrees Fahrenheit). It will help prevent damage. To prevent the car wrap from being scratched by any contaminants when you hand wash it, wash off the vehicle to remove as much dirt and grit as possible.

Use a pressure washer only if it is filthy. Spray the water at a distance of at least a foot from the car. Spray water perpendicularly rather than at an angle to avoid removing the edges of the vinyl wrap.

Step 4: Get the cleaning solution ready.

Use cold water to spread out a mild vehicle wash soap before using it. Observe the dilution guidelines listed on the product's label.

Step 5: Use a soft, Non-Abrasive sponge or cloth with the cleaning solution.

If the vehicle is not that dirty, use the two bucket method with a soft, non-abrasive sponge. Always use dust filters in the bucket to remove dust from the washcloth. When washing it with hands, work on a particular area, utilizing the solution to scrape, then rinse and dry the area. By this method, the solution won't drain into vinyl, avoiding any water spots.

Step 6: Let the car dry.

Let the car air dry, or you can use a microfiber towel to wipe the car.

The benefits of having a car with Vinyl wraps and lettering comes with the responsibility of learning how to wash it correctly. Cline Wraps in Houston uses correct measures to wash a car with Vinyl wraps, as indicated above and provides a neat and attractive vehicle.

The blog “How Do You Clean & Wash Vinyl Wraps?” originally post Here.